更新時間：2017-10-16
華儀 7100系列絕緣耐壓測試儀擁有大尺寸128 x 64 LCD顯示器，可完整呈現測試結果，提高判讀效率；體積小、重量輕 （10kg），，適合簡易高壓測試應用。優惠供應eec中國臺灣華儀7130系列絕緣耐壓測試儀
免費咨詢：
中國臺灣華儀7130絕緣耐壓測試儀規格
優惠供應eec中國臺灣華儀7130系列絕緣耐壓測試儀
華儀 7100系列絕緣耐壓測試儀擁有大尺寸128 x 64 LCD顯示器，可完整呈現測試結果，提高判讀效率；體積小、重量輕 (10kg)，，適合簡易高壓測試應用。7100 系列絕緣耐壓測試儀提供多臺聯機同步測試功能，亦可透過遠程控制 (RS-485 或PLC 遠程控制接口)，滿足自動化測試，提高生產效率。
優惠供應eec中國臺灣華儀7130系列絕緣耐壓測試儀
產品特點:
· 大型128*64 Graphic LCD 顯示器
· 單機可與7315接地阻抗測試器連結符合標準19英吋儀器架
· 可同時進行100臺的聯機測試
· 內建10組程序記憶、每一組3個測試步驟可進行程序記憶步驟的連結測試
· 快速放電功能，可于0.2秒將被測物上的電能放完，確保人員安全
· 防高壓觸電功能，當人體誤觸時可立即中斷輸出
· 開機自我檢測功能的測試，可于測試前進行判定各項測試功能是否正常
· 前面板軟件輸入校正
· 時間與日期的設定，可設定校正時間及預警時間提醒使用者
· 內建PLC Remote遙控界面
· 鍵盤鎖定功能
· 安全鎖定功能
· 體積小、重量輕
產品規格:
| MODEL | 7130 | 7132 | 7140 | 7142 |
| AC WITHSTAND VOLTAGE | ||||
| Output Rating | 5KVAC/20mA | |||
Range | Resolution | Accuracy | ||
| Output Voltage, KVAC | 0-5.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Frequency | 50Hz/60Hz ±100ppm, User Selection | |||
| Output Waveform | Sine Wave ,THD.<2% (Resistive Load), Crest Factor = 1.3 - 1.5 | |||
| Output Regulation | ± (1% of output + 5V), From no load to full load | |||
| SETTINGS | ||||
| Max-Limit AC Current, mA | 0 - 20.00 | 0.01 | ±（2% of setting + 2counts） | |
| Min-Limit AC Current, mA | 0 - 9.999 | 0.001 | ±（2% of setting + 2counts） | |
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Ramp Down Time, second | 0 - 999.9 | 0.1 | ||
| Dwell Time, second | 0, 0.3 - 999.9 | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| DC WITHSTAND VOLTAGE (7140,7142 ONLY) | ||||
| Output Rating | 6KVDC/7500?A | |||
| Output Voltage, KVDC | 0 - 6.00 | 0.01 | ±（2% of setting + 5V） | |
| Output Ripple | <5%（6KV/7500?A at Resistive Load） | |||
| SETTINGS | ||||
| Max-Limit DC Current, ?A | 0 - 7500 | 1 | ±（2% of setting + 2counts） | |
| Min-Limit DC Current, ?A | 0 - 999.9 | 0.1 | ±（2% of setting + 2counts） | |
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Ramp Down Time, second | 0, 1.0 - 999.9 | 0.1 | ||
| Dwell Time, second | 0, 0.4 - 999.9 | 0.1 | ||
| Arc Detection | 0, 1 - 9 ranges (0=OFF, 9 is the most sensitivity) | |||
| Discharge Time | ≦ 200 msec | |||
| INSULATION RESISTANCE (7132,7142 ONLY) | ||||
| Output Rating | 1KVDC/9999MΩ | |||
| Output Voltage, DCV | 30 - 1000 | 10 | ±（2% of setting + 5V） | |
| SETTINGS | ||||
| Max-Limit Resistance, MΩ | 0, 1 - 9999 (0=OFF) | 1 | ±（2% of setting+2counts）at 500-1000VDC, | |
| Min-Limit Resistance, MΩ | 1 - 9999 | 1 | ±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ | |
| ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ | ||||
| Ramp Up Time, second | 0.1 - 999.9 | 0.1 | ±（0.1% + 0.05sec） | |
| Ramp Down Time, second | 0, 1.0 - 999.9 | 0.1 | ||
| Delay Time, second | 0, 0.5 - 999.9 | 0.1 | ||
| MEASUREMENT | ||||
| AC/DC Voltage, KV | 0 - 6.00 | 0.01 | ±（1.5% of reading + 1count） | |
| DC Voltage, V (IR only) | 30 - 1000 | 1 | ±（1.5% of reading + 5V） | |
| AC Current, mA | 0 - 3.500 | 0.001 | ±（2% of reading + 2counts） | |
3.00 - 20.00 | 0.01 | |||
| DC Current, ?A | 0 - 350.0 | 0.1 | ±（2% of reading + 2counts） | |
| DC Current, mA | 0.300 - 3.500 | 0.001 | ||
3.00 - 7.50 | 0.01 | |||
| Resistance, , MΩ | 1 - 9999 | 0.001 | ±（2% of setting+2counts）at 500-1000VDC, | |
| GENERAL | ||||
| Input Voltage AC | 115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.15A | |||
| PLC Remote Control | Input : Test , Reset , Memory1.2.3 , Interlock | |||
| Output : Pass , Fail , Processing , Reset-Out | ||||
| Interface(Option) | RS485 Interface | |||
| Memory | 10 memories, 3 steps/memory | |||
| Graphic Display | 128×64 Graphic LCD | |||
| Safety | Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS | |||
| Key Lock | To prevent unauthorized alteration of the test Parameters | |||
| Calibration | Build-in software and external calibrated meters | |||
| Verification | Build-in software driven verification menu to test fault ection circuits | |||
| Alarm Volume Setting | Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume. | |||
| Environment | 0-40℃, 20-80%RH | |||
| Dimension/Net Weight | 215mm(W)×89mm(H)×370mm(D)/ 10Kg | |||
| STANDARD ACCESSORIES | ||||
| Power Cord(10A) | ×1 | |||
| Fuses | ×2 (Including a spare contained in the fuse holder) | |||
| Interlock Disable Key(1505) | ×1 | |||
| Hipot Test Lead ,1.5m(1101) | ×1 | |||
| Hipot Return Lead ,1.8m(1102) | ×1 | |||
| *product specifications are subject to change without notice. | ||||
?優惠供應eec 中國臺灣華儀7132系列絕緣耐壓測試儀 詳細資料和報價歡迎我司咨詢。
發郵件給我們：sales@puliva.com